Tag Archives: Construct 3D

Thanks to @wagongrrl @openblackboard @gravescolleen @morrill_rob (and others!) for sharing 3D designs for coin cell battery holders! #MakerEd #STEAM #STEMed

Thanks to the generous makers below for designing and sharing these helpful 3D templates that hold a coin cell battery in place while allowing wires, conductive thread, and/or copper tape to conduct electricity:

From Tracy Rudzitis (@wagongrrl)
https://www.tinkercad.com/things/i7EUf0qO18W

From Erik Nauman (@openblackboard)
https://www.thingiverse.com/thing:2663569

From Colleen Graves (@gravescolleen)
https://www.tinkercad.com/things/dU4kTogxpjZ

From Rob Morrill (@morrill_rob)
https://www.thingiverse.com/thing:1888289

From Benny Malengier
https://www.thingiverse.com/thing:250503
https://www.thingiverse.com/thing:265116
https://www.thingiverse.com/thing:79502

From Andrew Comer
https://www.thingiverse.com/thing:653945

From Beam Contrechoc (@contrechoc)
https://www.thingiverse.com/thing:1627205

1 Comment

Filed under Uncategorized

3D designing & printing Xingming Yin (personal name seals) in Class 8 Mandarin. @BrearleyNYC #MakerEd #NYCISTk6

I’m currently working with Yue Tang and Yusi Gao, Class VIII Mandarin teachers at The Brearley School, on a Xingming Yin (personal name seals) project. Historically and currently, a yin is a seal or stamp used to “prove identity on documents, contracts, art, or similar items where authorship is considered important.” After learning about Ian Klapper’s medieval seals and “moveable type” projects at Construct3D conference, I was inspired to suggest this to the Mandarin teachers.

Yue and Yusi allotted three class periods for students to design a seal in Tinkercad, print their stamp on our Makerbot printers, and try using the finished product. The steps involved are:

  • Create a hand-drawn design
  • Use Photoshop to isolate the ink
  • Flip the image horizontally
  • Export as JPG
  • Convert JPG to SVG (with online converter)
  • Import SVG to Tinkercad
  • Place SVG onto a box
  • 3D print

Here are the slides I shared with the Brearley girls to help them navigate the Photoshop and Tinkercad steps at their own pace:

Today, I’m going to run to a stationery store to purchase sealing wax (which melts via an embedded wick like a candle) and wax glue sticks that can be heating through a glue gun. With better planning, I would have ordered these three items below via Amazon:

Here are my slides from a presentation about this project at a NYCISTk6 meetup with other technology teachers from NYC independent schools:

Leave a comment

Filed under Uncategorized

Notes from Day 3 of #Construct3D — can’t wait for the next event! #MakerEd #STEMed #STEAM

Keynote, Sallye Coyle of Shopbot shared the story of the company – primarily her husband wanted/needed a tool to help him build a boat, and initially they intended to sell to garage hobbyists. As it turned out, they now help Boeing, NASA, communities, machine shops, schools, and self-employed folks design and manufacture parts.

Darlene Farris-LaBar‘s session, Empowering Creative Minds with 3D Printing for Art & Designincluding gorgeous examples of her art and inspirations. She is a co-founder of East Stroudsburg University’s G3D Super Lab. She shared many lovely examples of pieces printed with a Stratasys full color, multi-material 3D printer – they are just awe-inspiring.

Next, Jennifer Grayburn and Veronica Ikeshoji-Orlati led a session, Remaking the Past: Teaching Art History and Material Culture Through 3D Printing. They talked about having students locate, analyze, and print monuments and other works of art and how the process is most important (similar to what Corinne shared yesterday).

My friend, Ian Klapper of City and Country School, led a session on Visualizing the Past Into the Present and Future. He talked about the constraints of space in a NYC independent school located in Greenwich Village causing him to integrate and bring things into the classroom rather than have the luxury of a designated “Makerspace” — I too am very familiar with this workaround. At C&C, 3D printing is primarily done in Grades 5 and 6, but Ian has been working with teachers to 3D print with younger students too. He shared projects including Viking chess pieces, Medieval wax seals, Mesopotamia cylinder seals, Islamic clay tiles, Renaissance architecture, game pieces, Lenape legends, and moveable type for C&C’s printing press. Three more resources shared at Ian’s session: Thingiverse’s Universal Connectors KitReflow recycled filament, and Mcor ARKe 3D printer which uses paper rather than plastic to form models.

And finally, the last session I attended was an energetic and remarkable share by Chris Sweeney entitled, 3D Printing and Digital Fabrication in the Design Classroom. Chris shared tons of tips, ideas, and photos of student projects including TurtleArt, MakeMakey cardboard instruments, Community Chess pieces, prosthetic tools for a student with cerebral palsy, and more. He also mentioned algae filament, Trnio (a phone scanning app), and using rock tumblers to smooth and polish 3D prints. Chris’s slides from the session are here: https://schd.ws/hosted_files/construct3d2017/db/3D%20Printing%20and%20Digital%20Fabrication%20in%20the%20Design%20Classroom.pdf

After Chris’s session, I caught the last two minutes of Exploring 3D Design Software and Best Practices consisting of panelists Matthew Borgatti, Sean Charlesworth, Michael Curry, Darlene Farris-LaBar, Eric Schimelpfenig, and Laura Taalman and moderated by Matt Griffin of Ultimaker.

Because I can’t remember things like I used to, here are some links from Sarah O’Rourke King, Consumer Youth Marketing Manager at Autodesk, of sites and people I want to follow up on:

Finally, the ever-inspiring Corinne Takara suggested getting ideas and motivation from these sources:

Corinne also honored me with one of her mycelium lights – she even gave it to me in a plastic corsage box! I told her I would absolutely go to prom with her — luckily she laughed. 🙂

1 Comment

Filed under Uncategorized